mold release
英 [məʊld rɪˈliːs]
美 [moʊld rɪˈliːs]
脱模，脱模剂
双语例句
- Mold release agents cannot be used as shortmolding, fish-eye marks, streaking and blurring would occur.
使用脱模剂可能造成短射（缺料），鱼眼纹，条纹，表面斑点，或影响透明度。 - Internal mold release and UV-stabilized.
内部脱模和紫外线稳定。 - Applying mold release or silicone to the die exit area after cleaning can reduce the rate of buildup and extend the time between cleanings.
清除积料后在口模出料口使用脱模剂或者硅酮可以减轻积料程度并延长两次清除之间的时间。 - E.O Cleaner washes off mold release agents and oil stains without affecting most plastic bases.
可清洗脱模剂和油污，几乎所有的塑料坯料不会受其侵蚀。 - Applicable to a variety of mold release, maintenance and cleaning, easy to use, Demoulding effect.
适用于各种模具的脱模，保养和清洁，使用方便，脱模效果好。 - Contains a mold release agent.
包含脱模剂。 - Main industrial lubricants, metal processing oil, anti-rust agents, cleaning agents, mold release agents such as product development, production and sales.
公司主营工业用润滑油、金属加工油、防锈剂、清洗剂、脱模剂等产品的研发、生产和销售。 - The ways of information searches are more flexible. For the search requests of users or other systems, we can use uniform search logic mold piece to process, release the legal power control, lower the system cost and make it easy to maintain.
信息检索方式更加灵活，对于用户或其它系统的检索要求，可以通过统一的查询逻辑模块进行处理，发布权限控制，降低系统成本且便于维护。 - Neither external mold release agent nor the post curing of the moulding parts for Nylon RIM system is needed. The Shock resistance and heat resistance of Nylon-RIM parts are better than PU-RIM.
尼龙-RIM体系不用外脱膜剂，产品无需后固化处理，其制件抗冲击强度和耐热性等均比PU优越。 - The molding process of transfer coating is similar to sodium silicate, but the coating is prior to function the molding process. It must solve the problem the time of mold release, unloading mold, gas forming property and so on.
转移涂料法的造型过程和水玻璃砂造型过程相似，只是由于涂料提前介入造型过程，须研究解决脱模时间、起模、发气性等问题。 - The paper introduces the causes of the cracks of the line of fusion for the high-temperature resistant engineering plastics polyphenylene ether sulphone parts and their eliminating method from the product and mold design, the selection of mold release agents and molding technology.
从制品设计、模具设计、脱模剂选择及成型工艺诸方面，论述工程塑料聚苯醚砜塑料件熔接线开裂的产生原因及消除方法。 - The effect of mold release was good, so the appearance qualification rate of rubber products was improved. After adjusting the formulation, the cost was reduced.
脱模效果良好，可提高产品外观合格率，经调整配方，可降低成本，提高质量。 - Polyether/ polysiloxaue copolymer has been widely used as fabric finishing agent, foam, defoamer, mold release, petro-extractant and paint additive.
察醚一聚北氧烷共聚物广泛用作为织物整理剂、泡沫材料、消泡剂、脱模剂，石油萃取剂和涂料助剂等。 - Inner Mold Release Agent LTM-A in the Application of Molded Rubber Articles
橡胶内脱模剂－LTM－A在模压橡胶制品中的应用 - Application of Inner Mold Release Agent PA
内脱模剂PA的应用 - By investigation, the carbon comes from mold release in the surface of ingot materials.
经调查，碳来源于原材料重熔锭表面粘附的脱模剂。 - Applicable to selected Molded LDPE foam formula is superior to the fluoride release agent emulsion silicone release agent, mold release properties of the part release agent approach or exceed the fluoride release agent GU-2080.
筛选出了适用于LDPE发泡成型制品的氟脱模剂配方优于乳化硅油脱模剂，脱模剂的部分脱模性能接近或超过了GU&2080氟脱模剂。 - To achieve Mold order release control, there are three main factors should be determined: orders comprehensive workload, workload limits of task pool and the strategy of order release control.
要实现模具订单投放控制，有三个主要因素应该予以确定：订单综合负荷、任务池负荷界限和订单投放控制策略。